In an emergency, it frees both hands to hold eyes open to the flow of water. Delivering more than 3 gallons of water per minute, it does so at a reasonable height. No plumbing required. Two of the most common adapters are packed with the unit. Other adapters are available from manufacturer. Meets ANSI Standard #Z358.1-1998 for an eyewash unit.

• The addition of the Eliminator Valve allows water temperature to be pre-set at the faucet and remain on.
• You now have a dedicated face wash & eyewash station with only cold water available.
• For sink use, the water flow is activated by the use of the push through plunger on the Eliminator Valve.
• Push the plunger to the opposite side for water flow.
• In operation, unit mounts to the spout with two spray nozzles curving upwards with a 15 degree greater angle then the standard OK-II model.